RPisPLC first boot

Booting the RPisPLC for the first time.

First BOOT

  1. Begin by slotting your SD card into the SD card slot on the Raspberry Pi
  2. Plug in an ethernet cable into the ethernet port next to the USB ports.
  3. Plug in the micro USB power supply, this will turn on and boot your Raspberry Pi.

Connect to Raspberry Pi over the network

$ ping
PING ( 56(84) bytes of data.
64 bytes from icmp_req=1 ttl=64 time=0.228 ms
64 bytes from icmp_req=2 ttl=64 time=0.179 ms
64 bytes from icmp_req=3 ttl=64 time=0.174 ms

Using SSH

$ ssh pi@
The authenticity of host ' (' can't be established.
ECDSA key fingerprint is f7:1d:ea:c4:c7:99:7b:2f:32:2b:f7:79:73:f0:56:61.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '' (ECDSA) to the list of known hosts.

Password by default: raspberry.

pi@'s password:
Linux rpiplc3 3.18.11+ #781 PREEMPT Tue Apr 21 18:02:18 BST 2015 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Tue Jul 21 15:01:59 2015 from msi-ge60-pc.lan

Check RPIPLC directories

Login as root, root password is set to 'raspberry'.

pi@rpiplc3 ~ $ su -

Change to directory '/root/rpiplc'.

root@rpiplc3:~# cd /root/rpiplc/

List directory contents .

root@rpiplc:~/rpiplc# ls -al
total 264
drwxr-xr-x 2 root root   4096 Sep  5 14:43 .
drwx------ 3 root root   4096 Sep 17 09:27 ..
-rwxr-xr-x 1 pi   pi      337 Sep  2 09:47 plcstp.sh
-rwxr-xr-x 1 pi   pi      560 Sep  2 09:49 plcstrt.sh
-rwxr-xr-x 1 pi   pi   249554 Sep  1 11:18 rpiplc
-rw-r--r-- 1 pi   pi      185 Sep  5 14:42 xxxx.obj

Hardware setup >


Add new comment